For construction and trade businesses
Tier-1 ready compliance for
Australian construction.
SWMS, WHS policy, hazard registers and inductions drafted against SafeWork NSW, WorkSafe Victoria and WHSQ — the same standard tier-1 builders demand before they let you on site.
What we generate for you
Every hazard, every service — mapped to a clause.
Tell us what you do and what could go wrong. We draft a SWMS, policy clause or register entry against each one — with the regulatory reference embedded.
Hazards covered
- Working at heightsSWMS · Working at heights (WHS Reg 78–82)
- Manual handlingSWMS · Hazardous manual tasks (WHS Reg 60)
- Power toolsPlant & equipment safe operating procedure
- Asbestos exposureSWMS · Asbestos (Code of Practice — How to Manage and Control Asbestos)
- Confined spacesSWMS · Confined space entry (WHS Reg 66–77)
- Trenching & excavationSWMS · Excavation work ≥1.5m (WHS Reg 304–305)
- Hot worksSWMS · Hot works & spark generation
- Dust & silicaSWMS · Crystalline silica (WHS Reg 529CA + air monitoring)
- NoiseHearing protection program (WHS Reg 56–59)
- Mobile plantSWMS · Mobile plant operation (WHS Reg 213–214)
- Falling objectsSWMS · Falling objects (WHS Reg 54)
- ElectricalSWMS · Working with electricity (WHS Reg 140–165)
Services covered
- Site supervisionPrincipal contractor duty holder schedule + inspection checklist
- TilingSWMS · Tiling, including silica dust and manual handling
- BricklayingSWMS · Masonry & bricklaying with silica controls
- ConcretingSWMS · Concrete pours, pump operation and slump testing
- CarpentrySWMS · Framing, formwork and timber handling
- PlumbingSWMS · Plumbing & gas, with confined space module
- ElectricalSWMS · Electrical isolation and test-and-tag procedure
- RoofingSWMS · Roof work ≥2m with edge protection module
- DemolitionSWMS · Demolition (WHS Reg 142A) + asbestos screening
- ExcavationSWMS · Excavation, shoring and ground support
- PaintingSWMS · Painting, ventilation and hazardous substances
- GlazingSWMS · Glazing, lifting frames and edge work
Document set
Eight documents.
Tailored to your trade.
Construction packs lead with WHS, SWMS and a hazard register sized for high-risk work — every reference points back to the Model WHS Regulations and the relevant state code of practice.
- 01
WHS Policy
coreDrafted against the Model WHS Act and your state regulator, with construction-specific duty holder clauses for PCBUs, principal contractors and HRCW.
- 02
Safe Work Method Statements
operationsOne statement per high-risk construction activity you perform — height, excavation, demolition, hot works, confined spaces — each citing the WHS Regulation reference.
- 03
Incident & Hazard Register
operationsIncident & hazard register prefilled with construction-specific notifiable incident categories, including dangerous incident triggers under s.37.
- 04
Emergency Response Plan
operationsSite-aware emergency plan covering trench rescue, scaffold collapse, electrical contact and severe weather stop-work thresholds.
- 05
Employee Code of Conduct
peopleBehaviour standards aligned with principal-contractor inductions and Fair Work modern award expectations.
- 06
Privacy Management Plan
coreAPP-compliant privacy plan covering subcontractor records, biometric site sign-in and CCTV.
- 07
Anti-bullying & Harassment
peopleRespect-at-work clauses calibrated for site dynamics, drawing on the Fair Work Commission's anti-bullying jurisdiction.
- 08
Training Register
operationsRegister prepopulated with white card, EWP, working-at-heights and HRWL refresher cycles.
Operator on PolicyPack
“We needed a WHS system for a tier-1 builder tender. PolicyPack generated a 120-page, fully branded, hyper-specific pack in 15 minutes. We won the tender.”
Single Pack
Everything you need to pass the audit today — WHS, SWMS, privacy plan, conduct, incident register and emergency plan, branded for your business and tailored for construction & trades.
FAQ
Questions specific
to construction & trades.
The five or six things every operator in this industry asks us before getting started.
Yes — every construction pack is built to the same SWMS, hazard register, and induction structure that tier-1 head-contractors require for principal-contractor onboarding. Customers regularly win tenders with PolicyPack output as the basis of their compliance evidence.
All eight Australian WHS regulators — SafeWork NSW, WorkSafe Victoria, WHSQ, WorkSafe WA, SafeWork SA, WorkSafe Tasmania, WorkSafe ACT and NT WorkSafe. The pack adopts the local Code of Practice where it diverges from the model laws.
Yes. One SWMS per HRCW item on your project — working at heights ≥2m, demolition, excavation ≥1.5m, confined spaces, hot works and asbestos — each citing the relevant WHS Regulation clause and including hazard controls and sign-off blocks.
Yes. We include a crystalline silica control plan aligned with WHS Reg 529CA and an asbestos register and management plan referencing the Code of Practice. If you don't handle asbestos, we'll generate a screening procedure instead.
Every cover sheet, header and footer pulls your business name, ABN, logo and brand colour. The output is camera-ready for principal contractor onboarding portals like Rapid Global, OnSiteTrack and Avetta.
Generation takes around 20 minutes. The branded PDF and ZIP are delivered as soon as it finishes — ready to upload to a contractor onboarding portal or hand to your site foreman.
Ready when you are
Win the next tier-1 tender.
Not the next compliance argument.
Engineer a complete construction pack — WHS, SWMS, registers and inductions — before lunchtime.